How to make walls of cellular concrete

Recently, cellular concrete walls can be seen in an increasing number of buildings of recent construction. Cellular concrete, also called foam concrete, aerated concrete, silicate gas, foam concrete, etc., according to its adherents as a basic building structural material, is the best choice for building walls. The peculiarity of the walls built of cellular concrete is that they are very warm and plaster is easily applied to them. This is especially true for walls made with thin seams.
Cellular concrete mainly consists of a filler, which is sand or varieties of light ash, a solution of cement and lime and a mandatory baking powder. For the latter component, aluminum powder or a special paste are most often used. When sand is taken for the filler, as a result, porous concrete is obtained, which is called "white". The gray shade of concrete is given by fly ash and its mixtures. By changing the porosity of concrete, we also change its other qualities – thermal conductivity, strength and density index.
As a rule, walls made of cellular concrete are made of blocks, the side surfaces of which are left flat or profiled for the use of dowels or grooves. Walls are usually built in one to three layers. Thinner plates than standard blocks are also used. They are used to create formwork for lintels and crowns.
It is worth paying attention to the use of cellular concrete to create various types of walls. A wall of one layer in thickness reaches 40 – 42 cm and, when it is erected, a masonry with a thin seam 1-3 mm thick based on adhesive solutions or with a seam 1 – 1.5 mm thick based on a heat–protective solution is used.
For a two–layer wall, which will be load-bearing, blocks with a thickness of 17.5 - 30 cm are used and the blocks themselves should preferably be made of cement-lime mortar. You can also use a heat-protective solution, and in the case when thin seams are used, then an adhesive solution. The thermal insulation capabilities of cellular concrete are noticeably better than those of ceramics. Therefore, it is insulated with an insulating layer with a thickness of 9-14 cm, slightly thinner than the block itself.
A three-layer wall, also as a load-bearing one, has the same thickness as a two-layer one. However, the insulation layer can be used 1 or 2 cm thicker – from 8 to 13 cm. When applied on the facade of a building with a layer of 6-12 cm, tiles are used, on which plaster is applied after completion of laying. To attract customers, bookmakers today actively utilize special bonus codes like 1xbet. It is thanks to these codes that players receive various bonuses and broader opportunities in the gaming process. The current 1xBet promo code today can be used not only for sports betting, but also for online casino games and slots. Additionally, players can verify the validity of the promo code by logging into the official website of the 1xbet bookmaker, navigating to "account settings," and entering the promo code in the designated field (promo code verification).